音频播放有一部分在ijkplayer读线程中提到过，就是在读线程read_thread()中调用的stream_component_open()函数中会调用audio_open()，然后会调用aout->open_audio()函数，这个函数指针的赋值在ijkplayer初始化流程中的ff_ffpipeline_android.c/ func_open_audio_output()函数赋值，func_open_audio_output函数会先选择使用audiotrack还是opensles，这里以audiotrack为例，最终会调用SDL_CreateThreadEx(..., aout_thread, aout, ...)创建音频输出线程
音频输出线程aout_thread函数里面又调用ijksdl_aout_android_audiotrack.c/aout_thread_n()函数，下面来看一下该函数的重点代码
static int aout_thread_n(JNIEnv *env, SDL_Aout *aout)
{
...
audio_cblk(userdata, buffer, copy_size);
...
if (opaque->need_flush) {
opaque->need_flush = 0;
SDL_Android_AudioTrack_flush(env, atrack);
} else {
int written = SDL_Android_AudioTrack_write(env, atrack, buffer, copy_size);
if (written != copy_size) {
ALOGW("AudioTrack: not all data copied %d/%d", (int)written, (int)copy_size);
}
// TODO: 1 if callback return -1 or 0
}
...
}
可以看出音频播放线程这里主要干了两件事
- 调用回调函数audio_cblk
- 调用SDL_Android_AudioTrack_write()
1. 调用回调函数audio_cblk
首先看一下第一步，调用audio_cblk，该回调函数指针的赋值是在ff_ffplayer.c/audio_open()，里面有句话
wanted_spec.callback = sdl_audio_callback
调用audio_cblk其实就是调用来sdl_audio_callback，具体赋值有点点曲折，可以自己跟一下，来看看sdl_audio_callback函数做了些什么
/* prepare a new audio buffer */
static void sdl_audio_callback(void *opaque, Uint8 *stream, int len)
{
...
while (len > 0) {
if (is->audio_buf_index >= is->audio_buf_size) {
audio_size = audio_decode_frame(ffp);
...
}
...
if (!is->muted && is->audio_buf && is->audio_volume == SDL_MIX_MAXVOLUME)
memcpy(stream, (uint8_t *)is->audio_buf + is->audio_buf_index, len1);
else {
memset(stream, 0, len1);
if (!is->muted && is->audio_buf)
SDL_MixAudio(stream, (uint8_t *)is->audio_buf + is->audio_buf_index, len1, is->audio_volume);
}
len -= len1;
stream += len1;
is->audio_buf_index += len1;
}
...
}
sdl_audio_callback函数调用了ff_ffplayer.c/audio_decode_frame()，先来看看audio_decode_frame代码
/**
* Decode one audio frame and return its uncompressed size.
*
* The processed audio frame is decoded, converted if required, and
* stored in is->audio_buf, with size in bytes given by the return
* value.
*/
static int audio_decode_frame(FFPlayer *ffp)
{
...
reload:
do {
...
if (!(af = frame_queue_peek_readable(&is->sampq)))
return -1;
frame_queue_next(&is->sampq);
} while (af->serial != is->audioq.serial);
...
if (is->swr_ctx) {
...
} else {
is->audio_buf = af->frame->data[0];
resampled_data_size = data_size;
}
...
}
上面函数中的ff_ffplayer.c/frame_queue_peek_readable()和ff_ffplayer.c/frame_queue_next()函数类似与ijkplayer 音频解码线程中将的frame_queue_peek_writable()和frame_queue_push()，ff_ffplayer.c/frame_queue_peek_readable()检查sampq是否为空，如果为空则阻塞，接着ff_ffplayer.c/frame_queue_next()用来唤醒sampq的写操作，因为当sampq不可写时也会阻塞，最后is->audio_buf = af->frame->data[0]给audio_buf赋值
sdl_audio_callback函数调用完ff_ffplayer.c/audio_decode_frame()后，将赋好值的audio_buf给了stream，这个stream时调用audio_cblk(userdata, buffer, copy_size)传进来的这个buffer，说白了sdl_audio_callback函数也就是将sampq中的一帧给了这个buffer
2. 调用SDL_Android_AudioTrack_write()
现在看音频播放函数中的第二步调用SDL_Android_AudioTrack_write(env, atrack, buffer, copy_size)，这个buffer就是刚刚从回调函数sdl_audio_callback取出来的也就是从sampq中取出来的，怎么用这个buffer，看下面代码
int SDL_Android_AudioTrack_write(JNIEnv *env, SDL_Android_AudioTrack *atrack, uint8_t *data, int size_in_byte)
{
...
(*env)->SetByteArrayRegion(env, atrack->byte_buffer, 0, (int)size_in_byte, (jbyte*) data);
if (J4A_ExceptionCheck__catchAll(env))
return -1;
int retval = J4AC_AudioTrack__write(env, atrack->thiz, atrack->byte_buffer, 0, (int)size_in_byte);
...
}
这里将buffer也就是函数里的data放入byte_buffer中，后面调用 J4AC_AudioTrack__write函数最后调用java代码输出。
这里音频播放线程流程就结束了，其实就是干了两件事，取sampq中解码好的音频帧，然后传给java代码输出
