Linux新添加的硬盘，需要挂载。方法如下
[root@oracledb /]# fdisk /dev/vdb#进入磁盘初始化
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xc0fe6104.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n#第一步
Command action
e extended
p primary partition (1-4)
p#第二步
Partition number (1-4): 1#默认1
First cylinder (1-1040253, default 1): #回车
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1040253, default 1040253): #回车，默认最大值
Using default value 1040253
Command (m for help): p#第三步，再次查看，下面是刚刚分出来的
Disk /dev/vdb: 536.9 GB, 536870912000 bytes
16 heads, 63 sectors/track, 1040253 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc0fe6104
Device Boot Start End Blocks Id System
/dev/vdb1 1 1040253 524287480+ 83 Linux
Command (m for help): w#保存退出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@oracledb /]# fdisk -l#查看一下，哎~有了
Disk /dev/vda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00071419
Device Boot Start End Blocks Id System
/dev/vda1 * 1 5222 41940992 83 Linux
Disk /dev/vdb: 536.9 GB, 536870912000 bytes
16 heads, 63 sectors/track, 1040253 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc0fe6104
Device Boot Start End Blocks Id System
/dev/vdb1 1 1040253 524287480+ 83 Linux
[root@oracledb /]# mkfs.ext3 /dev/vdb1#格式化刚刚的那个分区，格式为ext3，注意名字已经变为vdb1了，不要打错了
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
32768000 inodes, 131071870 blocks
6553593 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
4000 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: #回车一下，慢慢等
done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@oracledb /]# mount /dev/vdb1 /u01#挂载
[root@oracledb ~]# df -h#查看一下，哎~又有了
Filesystem Size Used Avail Use% Mounted on
/dev/vda1 40G 2.9G 36G 8% /
tmpfs 7.8G 0 7.8G 0% /dev/shm
/dev/vdb1 493G 4.5G 463G 1% /u01#就是我
[root@oracledb /]# mount
/dev/vda1 on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/vdb1 on /u01 type ext3 (rw)#能看到这个分区，格式为ext3
设置开机启动自动挂载vi /etc/fstab
/dev/vdb1 /home ext4 defaults 0 0
