token防盗链：用户在播放时，必须先申请token，SRS会回调http检查这个token合法性。
# push gb28181 stream to SRS.
listen 1935;
max_connections 1000;
daemon off;
srs_log_tank console;
http_api {
enabled on;
listen 1985;
}
http_server {
enabled on;
listen 8080;
dir ./objs/nginx/html;
}
stats {
network 0;
}
stream_caster {
enabled on;
caster gb28181;
# 转发流到rtmp服务器地址与端口
# TODO: https://github.com/ossrs/srs/pull/1679/files#r400875104
# [stream] is VideoChannelCodecID(视频通道编码ID) for sip
# 自动创建的道通[stream] 是‘chid[ssrc]’ [ssrc]是rtp的ssrc
# [ssrc] rtp中的ssrc
output rtmp://127.0.0.1:1935/live/[stream];
# 接收设备端rtp流的多路复用端口
listen 9000;
# rtp接收监听端口范围，最小值
rtp_port_min 58200;
# rtp接收监听端口范围，最大值
rtp_port_max 58300;
# 是否等待关键帧之后，再转发，
# off:不需等待，直接转发
# on:等第一个关键帧后，再转发
wait_keyframe off;
# rtp包空闲等待时间，如果指定时间没有收到任何包
# rtp监听连接自动停止，发送BYE命令
rtp_idle_timeout 30;
# 是否转发音频流
# 目前只支持aac格式，所以需要设备支持aac格式
# on:转发音频
# off:不转发音频，只有视频
# *注意*!!!:flv 只支持11025 22050 44100 三种
# 如果设备端没有三种中任何一个，转发时为自动选择一种格式
# 同时也会将adts的头封装在flv aac raw数据中
# 这样的话播放器为自动通过adts头自动选择采样频率
# 像ffplay, vlc都可以，但是flash是没有声音，
# 因为flash,只支持11025 22050 44100
audio_enable on;
# 服务器主机号，可以域名或ip地址
# 也就是设备端将媒体发送的地址，如果是服务器是内外网
# 需要写外网地址，
# 调用api创建stream session时返回ip地址也是host
# $CANDIDATE 是系统环境变量，从环境变量获取地址，如果没有配置，用*
# *代表指定stats network 的网卡号地址，如果没有配置network，默认则是第0号网卡地址
# TODO: https://github.com/ossrs/srs/pull/1679/files#r400917594
host 192.168.2.100;
#根据收到ps rtp包自带创建rtmp媒体通道，不需要api接口创建
#rtmp地址参数[stream] 就是通道id 格式chid[ssrc]
auto_create_channel off;
sip {
# 是否启用srs内部sip信令
# 为on信令走srs, off 只转发ps流
enabled on;
# sip监听udp端口
listen 5060;
# SIP server ID(SIP服务器ID).
# 设备端配置编号需要与该值一致，否则无法注册
serial 34020000002000000001;
# SIP server domain(SIP服务器域)
realm 3402000000;
# 服务端发送ack后，接收回应的超时时间，单位为秒
# 如果指定时间没有回应，认为失败
ack_timeout 30;
# 设备心跳维持时间，如果指定时间内(秒）没有接收一个心跳
# 认为设备离线
keepalive_timeout 120;
# 注册之后是否自动给设备端发送invite
# on: 是 off 不是，需要通过api控制
auto_play on;
# 设备将流发送的端口，是否固定
# on 发送流到多路复用端口 如9000
# off 自动从rtp_mix_port - rtp_max_port 之间的值中
# 选一个可以用的端口
invite_port_fixed on;
# 向设备或下级域查询设备列表的间隔，单位(秒)
# 默认60秒
query_catalog_interval 60;
}
}
rtc_server {
enabled on;
# Listen at udp://8000
listen 8000;
#
# The $CANDIDATE means fetch from env, if not configed, use * as default.
#
# The * means retrieving server IP automatically, from all network interfaces,
# @see https://github.com/ossrs/srs/issues/307#issuecomment-599028124
candidate 192.168.2.100;
}
vhost __defaultVhost__ {
http_remux {
enabled on;
mount [vhost]/[app]/[stream].flv;
}
rtc {
enabled on;
bframe discard;
rtmp_to_rtc on;
}
http_hooks {
# whether the http hooks enable.
# default off.
enabled on;
# when client connect to vhost/app, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_connect",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "tcUrl": "rtmp://video.test.com/live?key=d2fa801d08e3f90ed1e1670e6e52651a",
# "pageUrl": "http://www.test.com/live.html"
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
# support multiple api hooks, format:
# on_connect http://xxx/api0 http://xxx/api1 http://xxx/apiN
on_connect http://192.168.2.200:8080/srs;
# when client close/disconnect to vhost/app/stream, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_close",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "send_bytes": 10240, "recv_bytes": 10240
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
# support multiple api hooks, format:
# on_close http://xxx/api0 http://xxx/api1 http://xxx/apiN
on_close http://192.168.2.200:8080/srs;
# when client(encoder) publish to vhost/app/stream, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_publish",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "stream": "livestream"
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
# support multiple api hooks, format:
# on_publish http://xxx/api0 http://xxx/api1 http://xxx/apiN
on_publish http://192.168.2.200:8080/srs;
# when client(encoder) stop publish to vhost/app/stream, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_unpublish",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "stream": "livestream", "param":"?token=xxx&salt=yyy"
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
# support multiple api hooks, format:
# on_unpublish http://xxx/api0 http://xxx/api1 http://xxx/apiN
on_unpublish http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
# when client start to play vhost/app/stream, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_play",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "stream": "livestream", "param":"?token=xxx&salt=yyy",
# "pageUrl": "http://www.test.com/live.html"
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
# support multiple api hooks, format:
# on_play http://xxx/api0 http://xxx/api1 http://xxx/apiN
on_play http://192.168.2.200:8080/srs;
# when client stop to play vhost/app/stream, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_stop",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "stream": "livestream", "param":"?token=xxx&salt=yyy"
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
# support multiple api hooks, format:
# on_stop http://xxx/api0 http://xxx/api1 http://xxx/apiN
on_stop http://192.168.2.200:8080/srs;
# when srs reap a dvr file, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_dvr",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "stream": "livestream", "param":"?token=xxx&salt=yyy",
# "cwd": "/usr/local/srs",
# "file": "./objs/nginx/html/live/livestream.1420254068776.flv"
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
on_dvr http://127.0.0.1:8085/api/v1/dvrs http://localhost:8085/api/v1/dvrs;
# when srs reap a ts file of hls, call the hook,
# the request in the POST data string is a object encode by json:
# {
# "action": "on_hls",
# "client_id": 1985,
# "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
# "stream": "livestream", "param":"?token=xxx&salt=yyy",
# "duration": 9.36, // in seconds
# "cwd": "/usr/local/srs",
# "file": "./objs/nginx/html/live/livestream/2015-04-23/01/476584165.ts",
# "url": "live/livestream/2015-04-23/01/476584165.ts",
# "m3u8": "./objs/nginx/html/live/livestream/live.m3u8",
# "m3u8_url": "live/livestream/live.m3u8",
# "seq_no": 100
# }
# if valid, the hook must return HTTP code 200(Status OK) and response
# an int value specifies the error code(0 corresponding to success):
# 0
on_hls http://127.0.0.1:8085/api/v1/hls http://localhost:8085/api/v1/hls;
# when srs reap a ts file of hls, call this hook,
# used to push file to cdn network, by get the ts file from cdn network.
# so we use HTTP GET and use the variable following:
# [app], replace with the app.
# [stream], replace with the stream.
# [param], replace with the param.
# [ts_url], replace with the ts url.
# ignore any return data of server.
# @remark random select a url to report, not report all.
on_hls_notify http://127.0.0.1:8085/api/v1/hls/[app]/[stream]/[ts_url][param];
}
}
参考：
【1】DRM：https://github.com/ossrs/srs/wiki/v3_CN_DRM#token-authentication
