上文中利用了
sudo ./configure --prefix=/usr/local/nginx
来编译安装nginx源码包,这样安装所有的nginx源码会被安装在/usr/local/nginx文件下.每次启动都需要通过/user/local/nginx/sbin/nginx来启动,参考通过Ubuntu下通过apt-get安装,会配置自启动脚本,我们也在通过源码包安装的情况下,配置自己的自启动脚本.
配置nginx开机服务
默认这么安装好以后每次检查配置、重启之类的操作略麻烦，所以我们模仿 Ubuntu 14.04 官方源，给系统设置个 nginx 服务，方便我们检查配置、启动重启关闭 Nginx 以及开机自动启动 Nginx.
sudo vim /etc/init.d/nginx
插入如下内容：
#!/bin/sh
### BEGIN INIT INFO
# Provides: nginx
# Required-Start: $local_fs $remote_fs $network $syslog $named
# Required-Stop: $local_fs $remote_fs $network $syslog $named
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: starts the nginx web server
# Description: starts nginx using start-stop-daemon
### END INIT INFO
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
##### nginx启动脚本
#####DAEMON=/usr/sbin/nginx
DAEMON=/usr/local/nginx/sbin/nginx
NAME=nginx
DESC=nginx
# Include nginx defaults if available
if [ -r /etc/default/nginx ]; then
. /etc/default/nginx
fi
test -x $DAEMON || exit 0
. /lib/init/vars.sh
. /lib/lsb/init-functions
# Try to extract nginx pidfile
####修改配置文件目录
####PID=$(cat /etc/nginx/nginx.conf | grep -Ev '^\s*#' | awk 'BEGIN { RS="[;{}]" } { if ($1 == "pid") print $2 }' | head -n1)
PID=$(cat /usr/local/nginx/conf/nginx.conf | grep -Ev '^\s*#' | awk 'BEGIN { RS="[;{}]" } { if ($1 == "pid") print $2 }' | head -n1)
##### -z str1:当串的长度为0时为真(空串)
if [ -z "$PID" ]
then
PID=/run/nginx.pid
fi
# Check if the ULIMIT is set in /etc/default/nginx
#### -n str1:当串的长度大于0时为真(串非空)
if [ -n "$ULIMIT" ]; then
# Set the ulimits
ulimit $ULIMIT
fi
#
# Function that starts the daemon/service
#
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON -- \
$DAEMON_OPTS 2>/dev/null \
|| return 2
}
test_nginx_config() {
$DAEMON -t $DAEMON_OPTS >/dev/null 2>&1
}
#
# Function that stops the daemon/service
#
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PID --name $NAME
RETVAL="$?"
sleep 1
return "$RETVAL"
}
#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
start-stop-daemon --stop --signal HUP --quiet --pidfile $PID --name $NAME
return 0
}
#
# Rotate log files
#
do_rotate() {
start-stop-daemon --stop --signal USR1 --quiet --pidfile $PID --name $NAME
return 0
}
#
# Online upgrade nginx executable
#
# "Upgrading Executable on the Fly"
# http://nginx.org/en/docs/control.html
#
do_upgrade() {
# Return
# 0 if nginx has been successfully upgraded
# 1 if nginx is not running
# 2 if the pid files were not created on time
# 3 if the old master could not be killed
if start-stop-daemon --stop --signal USR2 --quiet --pidfile $PID --name $NAME; then
# Wait for both old and new master to write their pid file
while [ ! -s "${PID}.oldbin" ] || [ ! -s "${PID}" ]; do
cnt=`expr $cnt + 1`
if [ $cnt -gt 10 ]; then
return 2
fi
sleep 1
done
# Everything is ready, gracefully stop the old master
if start-stop-daemon --stop --signal QUIT --quiet --pidfile "${PID}.oldbin" --name $NAME; then
return 0
else
return 3
fi
else
return 1
fi
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
restart)
log_daemon_msg "Restarting $DESC" "$NAME"
# Check configuration before stopping nginx
if ! test_nginx_config; then
log_end_msg 1 # Configuration error
exit 0
fi
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
reload|force-reload)
log_daemon_msg "Reloading $DESC configuration" "$NAME"
# Check configuration before reload nginx
#
# This is not entirely correct since the on-disk nginx binary
# may differ from the in-memory one, but that's not common.
# We prefer to check the configuration and return an error
# to the administrator.
if ! test_nginx_config; then
log_end_msg 1 # Configuration error
exit 0
fi
do_reload
log_end_msg $?
;;
configtest|testconfig)
log_daemon_msg "Testing $DESC configuration"
test_nginx_config
log_end_msg $?
;;
status)
status_of_proc -p $PID "$DAEMON" "$NAME" && exit 0 || exit $?
;;
upgrade)
log_daemon_msg "Upgrading binary" "$NAME"
do_upgrade
log_end_msg 0
;;
rotate)
log_daemon_msg "Re-opening $DESC log files" "$NAME"
do_rotate
log_end_msg $?
;;
*)
echo "Usage: $NAME {start|stop|restart|reload|force-reload|status|configtest|rotate|upgrade}" >&2
exit 3
;;
esac
:
- 注意设置好nginx的启动路径 DAEMON=/usr/sbin/nginx;
- 注意设置nginx.conf配置文件路径,并且nginx.conf配置文件里面的pid路径,以及其他日志文件的路径;
- 和apt-get官方启动脚本相比,####为修改以及备注理解部分
设置文件权限并增加到系统服务
sudo chmod +x ./nginx
sudo update-rc.d nginx defaults
nginx启动 关闭 重启
sudo /etc/init.d/nginx stop
sudo /etc/init.d/nginx start
sudo /etc/init.d/nginx restart
启动脚本涉及的命令参考:
ulimit -n 修改:http://blog.csdn.net/yangzhenzhen/article/details/8905846
linux shell之if_用if做判断:http://blog.csdn.net/crazyhacking/article/details/10182563
用start-stop-daemon启动Nginx:http://blog.csdn.net/csfreebird/article/details/8181337
