| Future Value Type（未来值类型） | 选中后，通过按下指定OPC DA服务器的“Start”按钮开始采集数据。 | R/W | R/W |
| Past Value（历史值） | 选中后，通过指定的OPC HDA服务器收集开始时间到结束时间之间的数据。 | R/W | R/W |
| Period （周期） | 数据采集周期。当选中未来值类型时有效。选中“Period（周期）”或“No of samples（样本数）”。 | R/W | R/W |
| No of samples (样本数) | 要生成的样本数。它在选择未来值类型时有效。选中“Period（周期）”或“No of samples（样本数）”。 | R/W | R/W |
| Start Time / End Time（开始时间/结束时间） | 生成的开始时间和结束时间。数据格式为“MM / DD / YYYY HH：MI：SS”。结束时间的默认值为“Now”。 | R/W | R/W |
| Acquisition Cycle（采集周期） | 采集周期指定数据采集周期。单位可在小时/分/秒之间选择。 | R/W | R/W |
| Start（开始） | 点击“start（开始）”后，将开始数据采集。同时还将检查和标记非法数据和错误/可疑数据。 | R/W | R/W |
| Terminate （终止） | 通过单击“Terminate（终止）”，数据采集将在中途停止。 | R/W | R/W |
| File Create New Definition File（文件创建新的定义文件） | 通过从“File（文件）”下拉菜单中单击“Import Task（导入任务）”，将显示导入任务对话框，如图B3.2.0b所示。它将选中的定义复制到调度程序配置文件夹。 | R/W | R/W |
| File Open Definition File（文件打开定义文件） | 通过单击“File（文件）”下拉菜单中的“Append Task（附加任务）”，将出现如图B3.0.0c所示的附加任务对话框。它将所选的控制器附加到调度程序。 | R/W | R/W |
| File Save Definition File（文件保存定义文件） | 通过单击“File（文件）”下拉菜单中的“Remove Task（删除任务）”，将出现如图B3.0.0c所示的删除任务对话框。它将所选的控制器附加到调度程序。 | R/W | R/W |
| File Save Definition File As…（文件将定义文件另存为...） | 通过单击“File（文件）”下拉菜单中的“Export Task（导出任务）”，将出现如图B3.2.0b所示的导出对话框。它将选中的定义复制到调度程序配置文件夹。 | R/W | R/W |
| File Open Data File（文件打开数据文件） | 通过单击“Edit（编辑）”下拉菜单中的“Arrange Schedule（排列计划）”，将出现如图B3.2.0d所示的“排列计划”对话框。 | R/W | R/W |
| File Exit （文件退出） | 退出面板。 | R/W | R/W |
| Edit OPC Server（编辑OPC服务器） | 通过单击“Edit（编辑）”下拉菜单中的“OPC Server（OPC服务器）”，将出现如图C2.1.1所示的OPC服务器对话框。 | R/W | R/W |
原文：
| Future Value Type | When selected, the data is collected after pushing “Start” button via the specified OPC DA server. | R/W | R/W |
| Past Value | When selected, the data between the start time to the end time is collected via OPC HDA server specified. | R/W | R/W |
| Period | Data acquisition period. It is effective when selecting Future Value Type. Either of “Period” or “No of samples” are selected. | R/W | R/W |
| No of samples | Number of samples to be generated. It is effective when selecting Future Value Type. Either of “Period” or “No of samples” are selected. | R/W | R/W |
| Start Time / End Time | Start time and end time to be generated. Data format is ”MM/DD/YYYY HH:MI:SS”. Default value of End Time is “Now”. | R/W | R/W |
| Acquisition Cycle | Acquisition cycle specifies the data acquisition period. Unit is selectable among Hour / Minute / Second. | R/W | R/W |
| Start | By clicking “start”, the data acquisition will start. Illegal data and Bad/Questionable data are also checked and marked. | R/W | R/W |
| Terminate | By clicking “Terminate”, the data acquisition will stop on the way. | R/W | R/W |
| File Create New Definition File | By clicking “Import Task” from the “File “ pull down menu, Import Task dialog will appear as shown in Figure B3.2.0b. it copies the selected definition to the scheduler configuration folder. | R/W | R/W |
| File Open Definition File | By clicking “Append Task” from the “File “ pull down menu, Append Task dialog will appear shown in Figure B3.0.0c. It appends the selected controller to the scheduler. | R/W | R/W |
| File Save Definition File | By clicking “Remove Task” from the “File “ pull down menu, Remove Task dialog will appear shown in Figure B3.0.0c. It will remove the selected controller from the scheduler. | R/W | R/W |
| File Save Definition File As… | By clicking “Export Task” from the “File “ pull down menu, Export dialog will appear as shown in Figure B3.2.0b. it copies the selected definition to the scheduler configuration folder. | R/W | R/W |
| File Open Data File | By clicking “Arrange Schedule” from the “Edit “ pull down menu, Arrange Schedule dialog will appear as shown in Figure B3.2.0d. | R/W | R/W |
| File Exit | Exit the panel. | R/W | R/W |
| Edit OPC Server | By clicking “OPC Server” from the “Edit “ pull down menu, OPC Server dialog will appear as shown in Figure C2.1.1 | R/W | R/W |
2017.2.21
