系统配置组件说明
人机界面站（HIS）
HIS主要用于操作和监视 - 它显示了用户快速掌握工厂运行状态所需的过程变量，控制参数，报警，图表等。
HIS还将通过其专门构建的操作员窗口面板对Exasmoc控制器执行操作和监视功能。下一节将提供关于使用这些面板的详细信息。其允许操作员使用公共站进行标准操作，监视和控制以及Exasmoc的先进过程控制，监视操作。
桌面类型的HIS是在Windows上运行的通用个人计算机。
控制台类型HIS是在Windows上运行的高端站。除了桌面型HIS功能外，它还具有类似于CENTUM前身的功能。
现场控制站（FCS）
除了许多其它功能之外，FCS主要控制BRC和ERC模式的工厂。如果用户在项目中使用COAST模块，则它将在FCS下运行。根据项目需要，用户系统可以是标准FCS（LFCS）和/或Compact FCS（SFCS）。
工程师站（ENG）
这是具有工程师权限的PC，可用于执行CENTUM CS 3000/1000系统生成和维护管理。它可以是与HIS相同类型的通用PC，甚至可以是普通PC。
SMOC-PC Builder
这是在Windows 95或更高版本操作系统上运行的软件。这个软件的主要目的是搭建/工程实施AIDA和/或SMOC模型；配置Exasmoc在线控制器和DCS定义界面。如本手册A部分所述，它将生成.EXA文件。然后这些文件通过以太网或便携式媒体（如Zip磁盘，MO，DAT等）从这台计算机下载到Exasmoc站。
APC服务器站
这是一台基于Windows的计算机，其本质上是将Exarqe / Exasmoc在线S / W运行。上图显示了Exarqe / Exasmoc在线控制器作为客户端连接到Exaopc服务器。
VF / VI 702卡用于在计算机和V网/VL网之间提供H/W接口。此外，还有一个Ethernet卡，用于在计算机和以太网之间提供H/W接口。
APC客户端站
这是一台基于Windows的计算机，其用于显示和操作Exarqe / Exasmoc视图。HIS是APC客户站之一。安装了Exasmoc / Exarqe客户端软件。
Web服务器站
这是一台从APC服务器站调取Exasmoc / Exarqe数据的Web服务器站。它还可以使用Web技术访问Intranet外部的Exasmoc / Exarqe数据。
原文：
Description of System Configuration components
Human Interface Station (HIS)
The HIS is mainly used for operation and monitoring – it displays process variables, control parameters, alarms, graphics etc. necessary for users to quickly grasp the operating status of the plant.
The HIS will also perform operation and monitoring function for Exasmoc controller through it’s specially built operator window panels. Next section will provide detailed information on working with these panels. This allows operator to use a common station for standard operation, monitoring and control along with Exasmoc’s Advanced Process Control, monitoring operations.
Desktop type HIS is a generic personal computer running on Windows.
Console type HIS is the high-end station running on Windows. In addition to desktop type HIS functionality it also incorporates functionality similar to its CENTUM predecessors.
Field Control Station (FCS)
The FCS mainly controls the plant in BRC and ERC modes besides its many other functions. If the COAST modules are used in the user project then it is intended to run under FCS. A Users system may have Standard FCS (LFCS) and/or Compact FCS (SFCS) depending on project demand.
Engineering PC (ENG)
This is the PC with engineering function used to perform CENTUM CS 3000/1000-system generation and maintenance management. It can be the same type of general purpose PC as the HIS, and can even be the same PC as the.
SMOC-PC Builder
This is software running on Windows 95 or higher OS. The main purpose of this Software is to build/engineer AIDA and/or SMOC model; configure Exasmoc online controller and DCS definition interface. It will generate .EXA file as explained in Part A of this manual. These files will be then downloaded from this computer to Exasmoc station either through Ethernet or through portable media (e.g. Zip disk, MO, DAT etc)
APC Server station
This is a Windows based computer where actual Exarqe/Exasmoc online S/W will be running. The above figure shows the Exarqe/Exasmoc online controller as client to Exaopc server.
VF/VI 702 Card is used to provide H/W interface between computer and V net / VL net. Further there is also an Ethernet card for providing H/W interface between computer and Ethernet.
APC Client station
This is a Windows based computer where Exarqe/Exasmoc views are displayed and operated. HIS is one of APC client station. Exasmoc/Exarqe client software are installed.
Web Server station
This is a Web server station to dispatch Exasmoc/Exarqe data from APC Server station. It is also available to access Exasmoc/Exarqe data outside the Intranet using Web technology.
2016.11.28
